Make a 15-second product ad end to end
A complete workflow for a short product advert in FlexPic: script, hero image, three video shots, voice-over, music and final assembly, with a credit budget for the draft and the final render.
A 15 second advert is three or four shots, one line of voice-over and a music bed. That is small enough to plan completely before you spend credits. This guide builds one from scratch for an invented product, a stainless steel bottle called "Nova", and gives a credit budget at every stage. Swap in your own product and the steps stay the same.
You will use four tools: Create Image, Frame to Video, Create voice-over and Create Music. The last step, putting the pieces together, happens in any video editor you already use.
Step 1: write the plan on one page
Decide these before you open a tool:
- Platform and ratio. A vertical 9:16 ad for Reels, TikTok or Shorts, for example. See aspect ratios for social platforms.
- One message. "Keeps drinks cold all day."
- Three shots of five seconds each. Shot 1 shows the product, shot 2 shows the key feature, shot 3 shows it in use and ends on the brand.
- One line of voice-over of about 35 words or fewer. Spoken English runs at roughly 2.5 words per second, so 15 seconds holds around 35 words. Aim lower to leave room for pauses.
The script:
Hot day. Long hike. Still ice cold. Nova keeps drinks cold for hours, and fits every bag. Nova. Take it everywhere.Step 2: build the hero image
Everything starts from one strong picture of the product. In Create Image, set Output to 9:16 and write the shot:
A matte green stainless steel water bottle standing on a sunlit rock beside a mountain trail, water droplets of condensation on the surface, warm morning light, shallow depth of field, product photography, clean composition with space above the bottleAt GPT Image 2.5 Low quality this costs about 8 credits per image, so make several. Choose the one where the bottle shape is clear. If you have a real product photo, upload it as a reference or as the start frame instead. Generated products are never a faithful copy of a real one, so use your own photographs when the exact product design matters.
Make two more stills for shots 2 and 3, for example a close-up of condensation on the bottle and a hiker's hand lifting it from a backpack side pocket. Use the first image as a reference so the bottle stays the same.
Step 3: animate each still
In Frame to Video, load a still under Set start frame and write a motion-only prompt. Do the three shots in turn.
Shot 1:
Slow push-in on the bottle, sunlight shifts across the metal, a light breeze moves the grass behind itShot 2:
Macro shot, condensation droplets slowly run down the bottle, soft focus background, static cameraShot 3:
A hiker's hand lifts the bottle from a backpack side pocket, handheld camera, trail in the backgroundSet each to 5s and switch Audio off, because you will add your own sound. Draft first at the lowest resolution, then rerun the shots you like at final quality.
| Stage | Settings | Credits |
|---|---|---|
| Draft, 3 clips | Seedance 2.0, 480p, 5s each | 1,332 |
| Final, 3 clips | Seedance 2.0, 720p, 5s each | 2,871 |
| Final, 3 clips | Wan 2.7, 720p, 5s each | 1,875 |
A single 15 second generation is another option, since several models accept up to 15 seconds. It costs the same per second but gives you no cuts to choose between, so three shots are easier to fix: when one clip fails you rerun five seconds, not fifteen.
Step 4: record the voice-over
Open Create voice-over. Paste the script into Prompt, choose a Voice and an Audio Model, and generate. The script above is about 110 characters, so it costs a few credits: about 11 with Eleven v3. Listen for pacing. If it is rushed, shorten the script rather than asking for speed. The voice-over guide has script tips.
Step 5: add music
In Create Music, use Quick Clip for a 30 second track and describe it by mood and tempo, leaving out names of artists or songs:
Warm, upbeat acoustic instrumental with light percussion and a steady optimistic pulse, outdoor adventure feeling, no vocalsSwitch Instrumental on so there are no vocals competing with the voice-over. A Lyria 3 Clip track costs about 50 credits.
Step 6: assemble and export
Download everything: the three clips, the voice-over and the music. In your editor:
- Place the clips back to back, trimming each to 5 seconds or slightly less.
- Lay the voice-over across the video and start it a quarter second in.
- Put the music underneath and lower it so the voice stays clear. A common starting point is music well below the voice level, raised slightly in the gaps.
- End on the product and the brand name, held for about a second.
- Export at 1080 by 1920 for vertical.
The budget
A realistic project looks like this:
| Item | Credits |
|---|---|
| Six hero images, GPT Image 2.5, Low | 48 |
| Draft clips, Seedance 2.0, 480p | 1,332 |
| Final clips, Seedance 2.0, 720p | 2,871 |
| Voice-over | 11 |
| Music | 50 |
| Total | 4,312 |
A single Seedance 2.0 clip at 720p costs about $3.83 at list price, and the whole project in the table above is about 4,312 credits. That is more than the Starter pack (2,300 credits), so plan on the Creator pack (5,900 credits) or a monthly plan. Reruns come on top, so budget for a second take of the clips that matter most.
Before you publish
- Check every frame for warped text, extra fingers and logo errors.
- Do not use real people's faces or voices without permission.
- If you advertise product claims, make sure they are true. A video model does not know your product's real specifications.
- Read the platform's rules on disclosing AI-generated content. They differ and they change.